An Integer Optimal Control Model of Production-Inventory System
Abstract
The optimal control model of the production-inventory system has investigated in several past studies, but without taking into account the integer condition. This study suggested a new approach to find the integer solution of production-inventory control model under periodic review policy. A new approach is based on the modified some equations of Pontryagin maximum principle that used to find the solution of the non-integer model. Our numerical results showed the efficiency of the new approach by saving the paths of inventory level and production rate up to reach its goals over time. The total penalty costs of the model were the same, despite a difference in the values of initial inventory level. Also, we testified a new approach by formulating the quadratic programming problem of the production-inventory system. The solution was the same for the two problems; quadratic programming and new approach.References
Y. Benhadid, L. Tadj, and M. Bounkhel, Optimal control of production inventory systems with deteriorating items and dynamic costs, Applied Mathematics E-Notes, vol. 8, pp. 194–202, 2008.
S. Benjaafar,M. ElHafsi,and T. Huang, Optimal control of a production-inventory system with both backorders and lost sales, Naval Research Logistics (NRL), vol. 57, no. 3, pp. 252–265, 2010.
Y. Daviz´on, C. Mart´ınez-Olvera, R. Soto, C. Hinojosa, and P. Espino-Rom´an, Optimal control approaches to the aggregate production planning problem, Sustainability, vol. 7, no. 12, pp. 16324–16339, 2015.
A. K. Dhaiban, M. A. Baten, and A. Nazrina, ptimal production policy for multi-product with inventory-level-dependent demand in segmented market, Far East Journal of Mathematical Sciences, vol. 101, no. 82, pp. 1691–1709, 2017.
A. K. Dhaiban, A comparison between linear programming model and optimal control model of production–inventory system, Current Science, vol. 112, no. 9, pp. 1855, 2017.
G. Emamverdi, M.S. Karimi, and M. Shafiee, Application of optimal control theory to adjust the production rate of deteriorating inventory system (Case study: Dineh Iran Co.), Middle-East Journal of Scientific Research, vol. 10, no.3, pp. 526–531,2011.
R. Germs, N. D. Foreest, and others, Optimal control of production–inventory systems with constant and compound Poisson demand, University of Groningen, Groningen, 2014.
A. Harahap, H. Mawengkang, S. Effendi, and others, An Integer Programming Model for Multi-Echelon Supply Chain Decision Problem Considering Inventories, IOP Conference Series: Materials Science and Engineering, vol. 300, no. 1, pp. 12–26, 2018.
F. Hnaien,F. Yalaoui, A. Mhadhbi, and M. Nourelfath, A mixed-integer programming model for integrated production and maintenance, IFAC-PapersOnLine, vol. 49, no. 12, pp. 556–561, 2016.
S. Kutzner, and G. P. Kiesm¨uller, Optimal control of an inventory-production system with state-dependent random yield, European Journal of Operational Research, vol. 227, no. 3, pp. 444–452, 2013.
T. Le, A. Hoai, and D. Tran, Optimizing a multi-stage production/inventory system by DC programming based approaches, Computational Optimization and Applications, vol. 57, no. 2, pp. 441–468, 2014.
A. Lee, and H. Kang, A mixed 0-1 integer programming for inventory model: a case study of TFT-LCD manufacturing company in Taiwan, Kybernetes, vol. 37, no. 1, pp. 66–82, 2008.
M. Lejeune, and F. Margot, Integer programming solution approach for inventory-production–distribution problems with direct shipments, International Transactions in Operational Research, vol. 15, no. 3, pp. 259–281, 2008.
S. Li, Optimal control of the production–inventory system with deteriorating items and tradable emission permits, International Journal of Systems Science, vol. 45, no. 11, pp. 2390–2401, 2014.
K. Maity,and M. Maiti, A numerical approach to a multi-objective optimal inventory control problem for deteriorating multi-items under fuzzy inflation and discounting, Computers & Mathematics with Applications, vol. 55, no. 8, pp. 1794–1807, 2008.
P. Moengin, and R. Fitriana, Model of integrated production-inventory-distribution system: The case of billet steel manufacturing, Proceedings of the World Congress on Engineering, vol. 2, 2015.
N. A.Mostafa, and A. B.Eltawil, A mixed-integer programming model for the Production-Inventory-Distribution-Routing Problem, 2015 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), pp. 310–314, 2015.
S.Ouaret,J. P. Kenn´e, and A. Gharbi, Hierarchical control of production with stochastic demand in manufacturing systems, Advanced Modeling and Optimization, vol. 13, no. 3, pp. 419–443, 2011.
X. Pan, and S. Li, Optimal control of a stochastic production–inventory system under deteriorating items and environmental constraints, International Journal of Production Research, vol. 53, no. 2, pp. 607–628, 2015.
M. Pattnaik, Fuzzy Economic Order Quantity (FEOQ) Model with Units Lost Due to Deterioration, Statistics, Optimization & Information Computing, vol. 2, no. 3, pp. 257–273, 2014.
A. Pooya, and M. Pakdaman, Analysing the solution of production-inventory optimal control systems by neural networks, RAIROOperations Research, vol. 51, no. 3, pp. 577–590, 2017.
J. Rezaeian, S. Haghayegh, I. Mahdavi, and others, Designing an integrated production/distribution and inventory planning model of fixed-life perishable products, Journal of Optimization in Industrial Engineering, vol. 97, no. 19, pp. 47–60, 2016.
N. Sangeetha,B. Sivakumar,and G. Arivarignan, Optimal control of production time of perishable inventory system with finite source of customers, Opsearch, vol. 52, no. 3, pp. 412–430, 2015.
T. Sawik, Integer programming approach to production scheduling for make-to-order manufacturing, Mathematical and Computer Modelling, vol. 41, no. 1, pp. 99–118, 2005.
S. P. Sethi, and G. L. Thompson, Optimal Control Theory: Applications to Management Science and Economics, Springer, 2005.
F. Silva, and S. Oscar, Optimal aggregate production plans via a constrained LQG model, Engineering, vol. 63, no. 12, pp. 773, 2014.
Y. Singh, P. Manik, and K. Chaudhary, Optimal production policy for multi-product with inventory-level-dependent demand in segmented market, Yugoslav Journal of Operations Research, vol. 23, no. 2, pp. 237–247, 2013.
X. Xie, Y. Li, Y. Zheng, and X. Li, A Mix-Integer Programming Model for Inventory Slab Allocation Problem, In proc. Applied Mechanics and Materials,Trans Tech Publ, vol. 442, pp. 549–555, 2014.
F. Yi, B. Baojun, and Z. Jizhou, The optimal control of production-inventory system, In proc. 25th Chinese Control and Decision Conference (CCDC), IEEE, pp. 4571–4576, 2013.
F. Ying, and Z. Yanzhi, A production-inventory model considering the deterioration of final products, ICSSSM11, IEEE, pp. 1–5, 2011.
F. You, and I. E. Grossmann, Mixed-integer nonlinear programming models and algorithms for large-scale supply chain design with stochastic inventory management, Industrial & Engineering Chemistry Research, vol. 47, no. 20, pp. 7802–7817, 2008.
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
